In today’s time, top-rated oscillating tools are not only just limited to remodelers and home builders, but many workers around the world are focusing on the usefulness of this tool.
It is the most versatile power tool online that every DIYer and professional should have. This multi-tool is a perfect tool for cutting, trimming, plastic, and cutting pipes.
However, being a novice, you might face some issues in handling the tool efficiently. So, here in this article, we have highlighted the best tips to use an oscillating tool. Read them to get the best results.
Table of Contents
Select the right saw blade
The selection of the right saw blade is very crucial for every project you work on so that you don’t end up wearing out too many blades.
Before you start work with an oscillating tool, check the label on the tool which defines what metal or object they are used to cut.
Use a straightedge to make straight cuts
If you need to shave off a bit of trim as somebody noticed the measuring tape upside down, then you can use an oscillating tool to make a precise cut. Use a straightedge if you require a guide for oscillating saw blades.
Straight blade or Round blade: Which one to choose?
A round blade is used to make long and linear cuts whereas a straight blade is used to make plunge cuts. To get cleaner cuts, make shallow cuts with the round blade and deepen it with the use of your oscillating saw.
Remove trim without damaging the wall
Here is a sure-shot technique to remove delicate trim items. Gently separate the trim from the wall to move an oscillating tool blade. Then use the nails and locomote them with the use of metal-cutting blades. You can use here a scrap of metal to protect the wall.
Use a bimetal blade to cut metal
Most of the blades available in store are used to cut soft materials like wood and plastic. So, if you use them to cut metal objects, the metal can break them in just a few seconds. So, while working with the metal objects, use a blade labeled bimetal.
Choose right grout removal blades
For small jobs, a carbide blade works fine, while for large projects, you can go for a diamond blade which saves your money as it can be used to 2-3 times long. Both the blades are available in variable thickness. You can opt for 1/6 inch and 1/8 inch blades that match your grout widths.
General tips to keep in mind while using an oscillating tool
- An oscillating tool can be used to scrape paint and adhesives from any material. With the use of a little bit of petroleum jelly, you make scrape the materials faster.
- Use the oscillating tool with the correct accessories to use this tool to sand wood, metal, and other objects easily.
- Make plunge cuts only in soft materials.
- For optimum working performance, provide uniform forward pressure.
- Choose a high oscillation rate for scraping.
Oscillating tools perform a variety of tasks, so these are the must-have tools in every DIYer list. But be cautious while using this tool as they run electricity.
About the Author:
Aarif Habeeb is a content writer at OtoolesTools and writes Home Improvement / Home Décor / Gardening / Hardware Tools / Water and Fire Restoration articles for businesses that want to see their Google search rankings surge.